Technicolor - Thomson TV/DVD Combo - Manual (Page 9)

9
EN
TV
DVD
Setting the time – List of programmes
The information on this page explains how to use the Time menu functions (Setting the time, Sleep timer,Wake-up),
as well as those for the LIST of programmes menu.
Time
Display the OVERVIEW menu using the tv menu button and select the
Time option. Press ok to confirm.The TIME menu is displayed.
Return: returns to the OVERVIEW menu.
• Sleep timer: set an automatic shut-off time (0 to 4 hours, with 5 minute
steps) using the
/ buttons.
Set 00:00 to cancel this function.
When the sleep timer is on, a message appears one minute before the
TV/DVD set goes into standby mode. Press any button on the keyboard or
on the remote control to cancel standby mode.
• Time reference on programme: select a programme using the /
or pr + / pr - buttons, or enter a programme number using the numeric
buttons.This programme will be used to provide an accurate time and date,
and must have a teletext service.
• Time (and Date): if the time is not provided by Teletext, the Wake-up
functions are not available and a message appears requesting you to change
the reference channel or to enter the time manually.To do this, choose the
relevant option and enter four digits using the remote control numeric
buttons.
Once you have set the time, you can use the Wake-up timer feature.
Time entered manually will be lost in case of a power cut.You must then re-
enter it.
• Wake up timer: press ok to check the box in order to enable this
function and display the menu options.
• Wake up time: enter the wake-up time using the numeric buttons.
• Programme number: use the buttons / or numeric buttons (2digits)
to enter the number of the programme you want to wake you up.
• Daily: press ok to check the box if you want a daily wake-up call.
Press exit to close the menu.
Put the TV/DVD set into standby mode using the B button on the remote
control.The indicator on the front panel starts flashing slowly.The TV/DVD set
will automatically switch on at the programmed time and for 1 hour duration if
you do not interrupt it by using the remote control.
List of programmes
Press the list (green) button on the remote control to display the LIST of
programmes. It has a maximum of 11 pages and shows the name and the
number of each programme.The last page lists units connected to the AV
sockets.
It opens on the page where the programme you are currently watching is
listed.To watch one of the programmes on the displayed page, use the pr + /
pr - or
/ buttons and press ok. You can also enter the last digit of the
programme number (for example, 5 for 25).
You can scroll through the pages using the
/ buttons.
Leave the menu with exit.
TV_DVD_LCD_en 17/06/02 11:45 Page 9