Switching on, More info – Technicolor - Thomson TV/DVD Combo User Manual

Page 3

Switching on

DVD

More info

Follow the instructions on this page on how to switch on your TV/DVD set and the remote control before going on to
the channel set-up procedure described on page 6.

Install two LR06 or AA batteries in the remote control (see below).

Plug the AC adapter jack into the DC IN socket at the back of your
LCD TV/DVD.

It is used to supply power to your TV/DVD which must only be powered with direct current.

Plug one end of the power cord to the adapter and the other end to a
mains socket (220 – 240V / 50Hz).

Connect the outside aerial or cable network to the g socket at the

back of the TV/DVD set.

The aerial socket (75 Ohms - VHF / UHF / cable) located at the back of the TV/DVD set
can be used for connecting an external aerial or other equipment fitted with a modulator
(video recorder, satellite receiver, etc.).
We recommend that you do not connect other equipment (VCR, decoder, etc.) to
your TV/DVD set to begin with, so as not to complicate the set-up procedure with this
additional equipment. Connect them when you have finished setting up the channels by
referring to page 23 of the manual.
NexTView-Link video recorder (see diagram at the end of this manual, on the inside
of the cover).

If you have a NexTView-Link video recorder, you must connect it to the AV1 socket of
the TV/DVD set using a SCART cable (21 pins, all wired) before proceeding to the initial
set-up described on page 6.

Switch the TV/DVD on by pressing the B

B button of the keyboard.

The first time you switch on the TV/DVD, the language selection menu appears.

Now go to page 6 for information on the Initial set-up, or page 7 for
information on how to update your channels if the channels have already
been set up (if you have moved house, for instance).

Information about connecting other equipment to the AV (Audio-Video) sockets is given
on page 23.
Before referring to it, complete the initial channel set-up procedure on the next page to
avoid any problems with equipment selection.

220 - 240 V

~ 50 Hz

Power supply unit

Please respect the environment and the relevant regulations.
Before you dispose of batteries or accumulators, ask your
dealer whether they require special recycling and if he is able
take them back.

PRECAUTIONS ON USING BATTERIES

Only use the battery types specified.

Make sure you use the correct polarity.

Do not mix new and used batteries.

Do not use rechargeable batteries.

Do not expose batteries to excessive heat, throw them on the fire,
recharge them or try to open them, as this could cause them to leak
or explode.

Remove the batteries from the remote control if you are not using it
for a long period of time (several weeks).

UK SOCKET

Equipment for the UK is supplied with a mains cable fitted with a moulded
plug.

The plug contains safety components and must not be replaced by one
sold by general retailers. It is fitted with a fuse that protects your television.
If your set has stopped working, the fuse may have blown. If it has, replace
it with an identical ASTA certified or BSI (BS1362) 5-amp fuse.

INSERTING THE BATTERIES

Install two LR06 or AA batteries in the remote control as indicated below.

TV_DVD_LCD_en 17/06/02 11:45 Page 3