Technicolor - Thomson TV/DVD Combo - Manual (Page 6)

Initial set-up
6
The initial set-up consists in carrying out all the necessary settings to search and store all the channels you can
receive in your area. Make sure that the TV/DVD is switched on and follow steps 1 to 6 on this page.
When you first switch the TV/DVD on, the language selection menu appears.
If this does not happen, refer to Manual channel set-up section to find out how to carry out an Autosearch.
1 Choose which language you want the menus to appear in using the
or button.
2 Confirm with ok.A list of countries appears, over two pages.
3 Select the relevant country using the or button.
This is the country you are in, or the country whose channels you want to receive if you
live near its borders.
4 Confirm with ok.A welcoming message appears.
5 Start automatic set-up by pressing ok.
The menu that appears tells you how set-up is progressing. Wait for the end of set-up
message before leaving the menu, otherwise the channels will not all be memorised.
Depending on the number of channels you want to receive, auto set-up can take up to 10
minutes.
To order, name and rename channels or delete channels stored twice, press
ok and go to step 6.
OR
If you do not want to reorganise the channels, press exit to close the
menu.
6 The PROGRAMME ORGANISATION menu allows you to name
channels, change the sequence of channels and delete channels stored
twice or with poor reception quality.
Follow the instructions on the screen. Use a TV programme magazine to identify the various
channels.
• Organising your channels:
Select the Select program. line.
Look for the channel that you want to assign the number 1 to with the
pr + and pr - or
and buttons using the channel logos to help you.The
number already assigned appears on the Select program. line.
Select the Swap with PR line, key in 01 and press ok.The channel goes
to first position: the two channels are swapped.
Repeat this procedure for the other channels.
• Deleting a channel:
Select the Select program. line and scroll through the channels using the
pr + and pr - or
and buttons.
When you come to a channel to be deleted, select Delete program., and
press ok.
Confirm by pressing again ok button.
• Changing the name:
Select the Change pr. name line and choose the character to be altered
with the
and buttons.
Scroll through the alphabet using the 1 and 2 buttons.
The name will be changed when you change line or leave the menu.
When you have finished, press exit to close the menu.
You may subsequently return to this menu by selecting the Programme Organisation
line in the INSTALLATION SUMMARY menu.
Missing channels: channels are searched for according to the
country selected, refer to the Manual channel set-up chapter for
information on how to set up channels that have not been found. Decoder: if you have connected a decoder to the AV1
socket, after the initial set-up you should display the MANUAL
INSTALLATION menu and confirm the Decoder option.
More info
TV_DVD_LCD_en 17/06/02 11:45 Page 6