11 technical data – TechniSat DigiCorder S1 User Manual
Page 66

11 Technical data
DBS tuner:
Input frequency range
950 .... 2150 MHz
Input level range
- 65 dBm ... - 25 dBm
DBS tuner input
F - connector
Input/output impedance
75 Ohms
Output for 1. IF
950 ... 2150 MHz (loop through)
AFC capture range
+/- 3 MHz
Demodulation
Shaped QPSK
Symbol rate
1 ... 45 Mbaud/s, SCPC/ MCPC
FEC
Viterbi and Reed-Solomon
Viterbi rates
1/2, 2/3, 3/4, 5/6, 7/8, automatic
adaptation
Roll-off Factor
35 %
Demultiplexing:
according to ISO 13818-1
Common Interface:
Type
1 Common Interface slot for CI
module
Power requirement
max. 0,3A/5V
PLL modulator:
UHF, Channel 21 ... 69
Antenna input
47 ... 862 MHz
Antenna output
47 ... 862 MHz
Video decoding:
Video compression
MPEG-2 and MPEG-1 compatible
Up to MP@ML (main profile @
main level)
Video standard
PAL / 25 Hz
Active image
720 Pixel x 576 lines
Picture format
4 : 3 / 16 : 9
Picture material 16:9
Automatic adaptation for 16:9 TV
sets (via SCART)
Letterbox filtering for 4:3 TV sets
Audio decoding:
Audio compression
MPEG-1 & MPEG-2 Layer I and II
Audio Mode
Dual (main/sub), Stereo
Sampling frequencies
32 kHz, 44.1 kHz, 48 kHz
Audio parameters:
Output analogue:
Output level L/R
0,5 V r.m.s. (nominal)
Output impedance
600 Ohm
THD
> 60 dB ( 1 kHz )
S/N
> 60 dB
Crosstalk
< - 65 dB
Input analogue:
Input level l/r
0,5 V r.m.s. (nominal)
Input impedance
> 40 kOhm
Volume at switch-on
Automatic use of last volume set-
ting
66
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 66