TechniSat DigiCorder S1 - Manual (Page 42)

7.15.3.1 Managing recordings
In this menu (Fig. 7-27) you have the opportunity to manage
your recordings.
>
Press OK to go to the sub-menu Manage recordings.
A list will be displayed showing all the recordings on
the hard drive.
> Use the up/down arrow keys to mark the desired pro-
gramme.
Delete
>
To delete the selected recording, press the red func-
tion key Delete.
> Confirm the following message by pressing OK, to
actually delete the recording.
Parental control
You can block access to recordings that are not suitable for
children or adolescents. These recordings can then be played
back only after entry of the 4-digit unit PIN code. For the
parental control function to be active, it must be switched on
as described in Point 8.3.
>
To block access to the marked recording, press the
green function key. The selected recording will then
be marked as blocked, indicated by the parental con-
trol symbol.
Editing
>
Press the yellow function key Editing to go to the
menu related to editing of the marked hard drive recor-
ding.
> Use the coloured keys to go directly to specific sec-
tions of the recording.
> Press the green function key to open a window sho-
wing the available functions.
> Use the up/down arrow keys to select the desired
function, and confirm by pressing OK.
At the time of going to press for this manual, the complete
range of functions in this menu was not yet finalised, it is the-
refore not possible to to go into more detail in this regard. An
updated version of this manual, reflecting the current func-
tions, can be downloaded at a later stage from the Internet, at
www.technisat.de.
7.15.3.2 Hard drive information
> Press OK to display a window showing information on
the integrated hard drive.
7.15.3.3 Hard drive management
> Press OK to display an overview of the number of
recordings made, and of the free space available.
(Fig. 7-28)
42
(Fig. 7-28)
(Fig. 7-27)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 42