TechniSat DigiCorder S1 - Manual (Page 18)

> Press Back to return to the menu Settings, or press
Menu to return to normal operation. The settings will
be automatically stored in memory.
6.3 Audio/Video settings
To optimize your digital receiver in conjunction with your tele-
vision set, you can make further settings in the menu Audio
/Video settings.
>
Press the Menu key to display the Main Menu.
> Use the up/down arrow keys to mark the line
Settings.
> Confirm by pressing OK. The sub-menu Settings will
be displayed. (Fig. 6-4)
> Now use the up/down arrow keys to mark the line
Audio/Video settings.
> Confirm by pressing OK. The menu Audio/Video set-
tings will be displayed. (Fig. 6-5)
> Use the up/down arrow keys to move the marker
around within the menu, in order to change the set-
tings as indicated. Please also note the messages
displayed on screen in some cases.
The following adjustments may be made:
6.3.1 Picture format TV set
> Use the left/right arrow keys to select the picture for-
mat appropriate for your TV set, 4:3 or 16:9. This func-
tion automatically adjusts the picture format for your
television set.
6.3.2 Language (Audio signal)
> In this line, use the left/right arrow keys to select your
preferred language. This function will automatically
select the preferred language, where available, after a
programme scan.
6.3.3 Language (Sub-titles)
The DVB receiver is equipped to display sub-titles on screen.
These will be displayed automatically if the function Sub-titles
has been activated, and if the sub-titles are being broadcast
in the language selected.
If the function has not been activated, sub-titles can be acti-
vated manually. Sub-titles are indicated by the symbol
in
the information box. Please also note Point 7.13 of the opera-
ting manual.
6.3.4 TV SCART mode
In this line, use the left/right arrow keys to select the appropri-
ate mode for your TV set, either CVBS or RGB. The setting
for standard sets is FBAS.
18
(Fig. 6-4)
(Fig. 6-5)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 18