TechniSat DigiCorder S1 - Manual (Page 33)

> If you wish to delete a timer event programmed via
SFI, proceed as described above to mark the selected
programme.
> Press the red function key Timer to open a selection
window.
> Use the up/down arrow keys to mark the line Timer
delete.
> Confirm by pressing OK.
> To delete an active timer, switch the digital receiver off
by pressing the On/Standby key.
> Press this key again to switch the receiver on, and
revert to normal operation.
7.14.7.3 SFI programme overview
Use the SFI programme overview to display a table showing
the current day’s programme for a single channel. Proceed
as follows:
>
Press the SFI key.
The SFI table “Now” will be displayed.
> Press the blue function key SFI Menu to open a
selection window.
> Use the up/down arrow keys to mark the line
Programmes.
> Confirm by pressing OK. The current day’s overview
of the selected programme will be displayed.
(Fig. 7-19)
> Now use the arrow keys to move the marker to the
desired time or programme.
The individual days of the week are shown at the bot-
tom of the screen.
If information is available for the following days, the
corresponding fields will be highlighted.
> To display the programme content of a particular day,
use the numeric keys to select the corresponding
day.
Display SFI overview of other programmes
>
Press the green function key Programmes.
A list of SFI programmes will be displayed.
(Fig. 7-20)
> Now use the arrow keys to mark the desired pro-
gramme.
> Press OK to display the SFI overview of the marked
programme.
7.14.7.4 SFI overview by programme type (genre)
If you are interested in particular types of programmes, you
can have the programme information displayed in certain pro-
gramme categories (genres), such as news, movies, etc..
>
Press the SFI key to display the SFI table “Now”.
33
(Fig. 7-19)
(Fig. 7-20)
Bed_Anl_Digicorder_englisch 18.03.2004 14:10 Uhr Seite 33