Texas Instruments MSP-FET430 - Manual (Page 17)

Get Started Now!
1-5
3) Click on the tab at the bottom of the workspace window that corresponds to
your tool (FETxxx) and desired language (assembler or C).
4) Use PROJECT->OPTIONS->FET Debugger->Setup->Connection to select
the appropriate port: LPTx for the parallel FET Interface or TI USB FET for
the USB Interface.
5) Use PROJECT->REBUILD ALL to build and link the source code. You can
view the source code by double-clicking on the project, and then double-
clicking on the displayed source file.
6) Use PROJECT->DEBUG to start the C-SPY debugger. C-SPY will erase the
device Flash, and then download the application object file to the device
Flash.
Refer to FAQ, Debugging #1) if C-SPY is unable to communicate with the
device.
7) Use DEBUG->GO to start the application. The LED should flash!
8) Use DEBUG->STOP DEBUGGING to stop debugging, to exit C-SPY, and to
return to the Workbench.
9) Use FILE->EXIT to exit the Workbench.
Congratulations, you’ve just built and tested your first MSP430 application!