Toshiba IK-HR2D - Manual (Page 17)

17
(b) Changing the automatic shutter detection (ratio between peak and average value)
䐖 Move the “䊲” to PEAK/AVE by pressing [MENU UP], [MENU DOWN] buttons.
䐗 Select the ratio between peak and average value by pressing [DATA UP], [DATA DOWN] buttons.
(c) Changing the automatic shutter response speed
䐖 Move the “䊲” to SPEED by pressing [MENU UP], [MENU DOWN] buttons.
䐗 Select the response speed by pressing [DATA UP], [DATA DOWN] buttons.
1 10 20
The response speed becomes faster by pressing [DATA UP]
The response speed becomes slower by pressing [DATA DOWN]
00:10 05:05 10:00
The peak value increases by pressing [DATA UP]
The peak value decreases by pressing [DATA DOWN]
(Peak:Average)
䟺 䟺䟺 䟺 1䠀 䠀 䠀 䠀 1䟻䟻䟻䟻 Changing the setting in AUTO mode
Shutter mode AUTO, MANUAL, SS
Video level adjustment -100 to 100
Peak and average ratio adjustment 00 10 to 10 00
-- 1 SHUTTER --
Automatic shutter response speed adjustment 1 to 20
MODE
LEVEL
Automatic shutter area selection
PEAK AVE 05
PRESET A, PRESET B, PRESET C, PRESET D, PRESET E
SPEED
AREA
AUTO
0
05
10
PRESET A
< MODE = AUTO>
Move up and down
by pressing
MENU UP,DOWN
Select the desired
value by pressing
DATA UP,DOWN
(a) Changing the video level in the automatic shutter mode
䐖 Move the “䊲” to LEVEL by pressing [MENU UP], [MENU DOWN] buttons.
䐗 Select the video level by pressing [DATA UP], [DATA DOWN] buttons.
-100 0 100
The value increases by pressing [DATA UP]
The value decreases by pressing [DATA DOWN]