TechniSat DigiBox IRDETO Integrated IRDETO - Manual (Page 36)

directly from the service provider/broadcaster, or from the Internet.
Select the menu
>Search>Program.
> Use the up/down arrow keys to mark the entry Program.
> Confirm with the
OK key.
The menu >Search>Program will be displayed.
This menu differs from the Transponder menu only in terms of the list item Service ID.
> Proceed as described in Point 7.7.3 above.
> Use the
up/down arrow keys to mark the entry Service ID.
> Use the numeric key pad to enter the Service ID number.
7.8 Activate factory settings/change data channels
You may at any stage revert to the original default settings for the LNB, as set in the factory.
You may also wish to delete the programme list, which may be outdated, completely before
initiating a new search. Please note that, if you delete all programmes from memory, you will
then have to initiate a search, and you will have to copy your selected programmes from the
Total List into the User List.
>
Use the Menu key to display the Main Menu.
> Use the
up/down arrow keys to mark the entry Settings.
> Confirm with the OK key.
The sub-menu >Settings will be displayed.
36
bed_anl_DigiBox Irdeto_englisch.qxd 30.01.02 12:03 Seite 36