TechniSat DigiBox IRDETO Integrated IRDETO User Manual

Page 27

The timer can be programmed as follows:
Date
>

Use the

arrow keys to mark the Date column

Use the

numeric key pad to enter the date on which you wish to record a pro-

gramme

Start
>

Use the

right arrow key to mark the Start column.

Use the

numeric key pad to enter the starting time for the timer.

Stop
>

Repeat the steps shown under "Start" to enter the time when the timer should stop,
i.e. be switched off.

In order to ensure a smooth operation, there should be a gap of at least one minute
between the end of one timer period and the start of the next timer period!
Switching Timer on - Repeat
>

Use the

right arrow key to mark the column Rpt.

If required, switch the timer on by pressing the

OK key (Display 1x)

By repeatedly pressing the

OK key you can set the timer for further days as follows:

Display:
-

Timer off

Timer on

Daily repeat

Repeat once per week

Repeat every two weeks

Repeat every 3 weeks

Repeat every 4 weeks

1-5

Repeat only on workdays

6-7

Repeat only on weekends

bed_anl_DigiBox Irdeto_englisch.qxd 30.01.02 12:03 Seite 27