TechniSat DigiBox IRDETO Integrated IRDETO - Manual (Page 12)

12
5 Installation
Now that you have made all the necessary connections to and from your receiver, and have
switched it on, you may, if necessary resp. if you wish, optimise the operation of the receiver.
5.1 OSD Language
This menu heading gives you the opportunity of selecting a language of your choice, in
which the menus will be displayed. The receiver is given a default setting of German in the
factory. You have a choice of English, German, Arabian, French, Italian, Greek and Dutch.
In order to change the OSD language, please follow these steps:
>
Use the
Menu key to select the Main Menu
> Select the entry
OSD Language (OSD-Sprache), marking it in blue by using the
up/down arrow keys.
> Confirm by selecting OK
The sub-menu
OSD Language (OSD-Sprache) will be displayed
> Select the preferred language by means of the up/down arrow keys. Use the
up/down arrow keys to move the marker by one line at a time, while the
left/right arrow keys are used to scroll to the previous or the following page res-
pectively.
> Press OK to store the selected language.
> Press
Back to return to the Main menu.
5.2 Basic Settings
In order to gain the optimal benefit from your DVB receiver, you can still set several individu-
al preferences.
>
Press the Menu key to call up the Main Menu display.
> Use the
up/down arrow keys to mark the entry Settings.
> Press OK to confirm this selection
The sub-menu Settings will be displayed.
bed_anl_DigiBox Irdeto_englisch.qxd 30.01.02 12:03 Seite 12