TechniSat DigiBox IRDETO Integrated IRDETO - Manual (Page 34)

> In order to search for programmes, press the
Menu key to display the Main Menu.
> Use the up/down arrow keys to mark the entry Search.
> Confirm with the OK key.
The sub-menu
>Search will be displayed.
> Use the arrow keys to select the search mode to be used.
> Press the
OK key to display the relevant sub-menu.
7.7.1 All
When this search mode is activated, all satellites and transponders available in the system
will be scanned. At the end, new programmes will be displayed in red type in the program-
me/channel list.
>
Use the
up/down arrow keys to select the All option.
> Confirm with the OK key.
The legend " Start search" will appear on the display.
> Press
OK again to start the search
> The search can be terminated at any time by pressing OK.
It is quite likely that a full scan may take 15 minutes or longer.
Please note any notes and information displayed on the screen.
7.7.2 Satellite
This search mode can be used to search a specific satellite. All other satellites will be
ignored in this mode.
>
Use the up/down arrow keys to select the Satellite option.
> Confirm with the
OK key.
The legend " Start search" will appear on the display.
> Before proceeding further, you will still have to select the satellite to be scanned.
Press the
OK key.
A selection window will appear with the four available satellite positions.
> Use the up/down arrow keys to select the satellite.
34
bed_anl_DigiBox Irdeto_englisch.qxd 30.01.02 12:03 Seite 34