Toshiba Tevion TSD-DR40HD - Manual (Page 26)

Computer System HyperTools Tevion TSD-DR40HD User Guide
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion TSD-DR40HD DVR User Guide.doc 18/9/08 at 21:49 Page 23
5.3.5 Changing the Title of a TV Program Recorded on HDD
After successfully recording and probably before viewing a TV program on hard disk you may
want to edit the title of the recording to make it easier to find it.
Unfortunately only a 12-character field is available in which to come up with a good name for
the program, albeit abbreviated. However, within those 12 characters you can make use of all
uppercase letters, all lowercase letters, all digits and the space character. Entering the new name
of the program is done on an on-screen keyboard.
1. On TRC press Power button to turn on the TV (if not already on).
2. On TRC pressed button until 2 is shown.
3. On DRC press STANDBY/ON button to turn on the DVR and wait until “Hello” display
on front panel has been replaced by “No disc” message shown on screen.
4. On DRC press HDD button to show TV programs recorded on the Hard Disk.
5. On DRC use the Down Arrow or Up Arrow button to highlight the data about the
program you wish to delete:
6. On DRC press the Right Arrow button to display the HDD submenu:
.
7. On DRC use the Down Arrow to select “Rename” and press the SELECT button:
8. On DRC press the Down Arrow button 3 times and Right Arrow button twice to
Backspace button. Press Backspace button several times to delete the old title.
9. Use the navigation keys to move around the Title name keyboard and change the title to
something more meaningful (the “Aa” button toggles between the upper and lower case
alphabets. Move to OK and press SELECT button to confirm the new title.
10. To exit, press the HDD button one or more times.