Toshiba Tevion TSD-DR40HD - Manual (Page 20)

Computer System HyperTools Tevion TSD-DR40HD User Guide
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion TSD-DR40HD DVR User Guide.doc 18/9/08 at 21:49 Page 17
5. Using the DVR
The Tevion DVR provides a number of useful facilities, including the following:
• Viewing television programs on our favourite channels in good video and audio quality.
• Good quality playback of CDs and DVDs.
• Easy recording of television programs onto hard disk or DVD for later viewing.
• Transfer of recorded programs from Hard Disk to DVDs.
• A function called “time-shifting” allowing the viewing of a television program to be
paused, while the continuation of the program is being recorded on hard disk (useful if the
phone rings in the middle of viewing).
5.1 Watching TV Live
5.1.1 Watching a TV Program (Digital Video Brodcast) Live
This is probably the most common use we will make of the DVR.
1. On TRC press the Power button to turn on the TV (if not already on).
2. On TRC press the button until 2 is shown.
3. If theBeomaster 7000 is in Stand By mode, press at the centre of the blank polished panel
at the bottom of the BRC to activate it. Then on
BRC first press Source on main panel
and then press TV on blue LCD panel.
4. On DRC press the STANDBY/ON button to turn on the DVR and wait until “Hello”
display on front panel has been replaced by “No disc” message shown on screen.
5. On DRC press the DVB button (once or twice) to show TV programs from digital
channels.
6. On DRC use numbered buttons, Down Arrow, Up Arrow, CH+ or CH- to select
program to watch.
5.1.2 Time-Shifting while Watching a TV Program (Digital Video Brodcast) Live
This allows you to take a pause for up to 60 minutes while watching a TV program live, for
example to answer the telephone. Not sure yet how to do this. More research required.
1. On TRC press the Power button to turn on the TV (if not already on).
2. On TRC press the button until 2 is shown.
3. On DRC press the STANDBY/ON button to turn on the DVR and wait until “Hello”
display on front panel has been replaced by “No disc” message shown on screen.
4. On DRC press the DVB button (once or twice) to show TV programs from digital
channels.
5. On DRC use numbered buttons, Down Arrow, Up Arrow, CH+ or CH- to select
program to watch.
6. On DRC press the ?
Found on a Forum: While still in Timeshift mode, press the Record button and hold it for 3 seconds.
This will transfer the entire buffer to hard disk.
Question: How do I go into Timeshift mode in the first place?