Toshiba Tevion TSD-DR40HD - Manual (Page 16)

Computer System HyperTools Tevion TSD-DR40HD User Guide
F:\Our Files\Our Computers\User Guides\Tevion (Wintal)\Tevion TSD-DR40HD DVR User Guide.doc 18/9/08 at 21:49 Page 13
Auto Scan Channel Enables the initiation of a search for analogue TV channels.
Press SELECT button to start the SCAN.
This makes the unit perform a scan for Analogue TV
programs. Each program found is identified by a program
number (Pxxx) and a channel number (CHzzz).
The following Australian Analogue programs and channel
numbers were found by this scan:
P003 CH002 (should be renamed ABC01)
P009 CH007
P011 CH009
P013 CH010
P025 CH028 (should be renamed SBS28)
P028 CH031
Only do this once. If you do it again any editing done via
“Modify Channel” will be lost.
Modify Channel Enables the editing of channel attributes, e.g. channel name.
Press SELECT button to begin the EDIT.
This makes it possible to change channel attributes to other
values than those found by the auto scan.
Program Table Enables selection of a channel, so that you can edit it via
“Modify Channel”. Done for CH002 and CH028) so that each
of these could be renamed as indicated above.
SORT
4.2 Setup Menu – Video
This menu deals with settings to do with TV system being used.
Submenu Comments
TV Type Enables selection of video system (PAL in Europe and
Australia, NTSC in America and Japan
2 Options: PAL (default)/NTSC
Set to PAL
TV Display Enables selection of screen ratio (4:3 or 16:9)
3 Options: 4:3 LB (default)/4:3 PS/16:9 WS
Set to 4:3 PS
Video Output Format Enables selection of output format depending on capabilities
of the TV. Modern TVs support Progressive output.
2 Options: Interlaced (default)/Progressive
Set to Interlaced
(since our old Toshiba TV doesn’t support Progressive)