Tut Systems SMS2000 - Manual (Page 92)

Configuring Web Proxy Settings
TUT Systems, Inc Page 92 of 104 P/N 220-06288-20
Note: Subscribers can manually remove a wpad.dat when using Windows
2000/NT by removing the following file:
C:\WINNT\Temporary Internet Files\wpad.dat
The file all versions of Windows should be named similarly.
To configure the time period for which a wpad.dat file sent to a subscriber is valid, use
this command:
set wpad-timeout seconds
For example, to set the timeout to 800 seconds, type:
sms2000%
set wpad-timeout 800
Web Proxy Server
Enable Proxy Server Support
When enabled, the SMS2000 will autodetect proxy servers configured on subscribers. A
subscriber may have a proxy server configured with any IP address, but the TCP port on
which her proxy server is configured must be included in the set of ports configured on
the SMS by the set proxy-ports command.
To enable proxy server support, use this command:
set proxy-server on
For example to enable proxy server support, type:
sms2000% set proxy-server on
Note: Changing the proxy server status requires a reboot.
Disable Proxy Server Support
To disable proxy server support, use this command:
set proxy-server off
For example to disable proxy server support, type:
sms2000% set proxy-server off
Note: Changing the proxy server status requires a reboot.
Viewing Proxy Server Support Status
To view proxy server support status, use this command:
show proxy-server