Tut Systems SMS2000 - Manual (Page 18)

Getting Started
TUT Systems, Inc Page 18 of 104 P/N 220-06288-20
Cursor Movement
To save time, you can use the arrow keys on your keyboard to navigate between levels.
The command keystrokes are used to move the cursor around on the command line and
within the command history buffer. The arrow keys can also be used for cursor
movement.
Navigation and cursor movement for the SMS2000 system is described in Table 2-2.
Table 2-2 Cursor Motion Keystrokes
Keystroke Operation
Backspace
Deletes the character behind the cursor
Delete Deletes the character under the cursor
Left arrow Moves the cursor back one character
Right arrow Moves the cursor forward one character
Up arrow Recalls the previous command in the command history
Down arrow Recalls the next command in the command history
Control+A Moves cursor to the first character at the beginning of the line.
Control+B Moves cursor backward to the beginning of the previous word to
the first character at the beginning of the line.
Control+C Interrupts the currently executing command
Control+E Moves the cursor to end of line
Control+K Deletes the characters from the cursor to the end of the line.
Control+R Reprint the current line to the screen
Control+W Moves cursor forward to the end of the next word
Control+X Deletes from the current cursor position to the beginning
.