Tut Systems SMS2000 - Manual (Page 38)

System Administration
TUT Systems, Inc Page 38 of 104 P/N 220-06288-20
SNMP Management
Beginning with SMS2.3.6, the SMS supports remote SNMP management. SNMP
System Contact and System Location will be reported in the SNMP system OID. All
SMS OIDs are read-only. An SNMP trap is sent to the trap-recipient when the SMS
boots or reboots. By default, the SNMP agent is disabled.
SNMP Agent
To enable the SNMP agent, type:
snmp enable
To disable the SNMP agent, type:
snmp disable
To view the SNMP agent status, type:
show snmp status
SNMP System Contact
To specify the SNMP System Contact, type:
snmp system-contact system-contact-string
For example,
SMS2000% snmp system-contact “Some Person”
Note: Place the system contact in quotes if it includes spaces
To view SNMP System Contact information, type:
SMS000$ show snmp system-contact
SNMP System Location
To specify the SNMP System Location, type:
snmp system-location system-location-string
For example,
SMS2000% snmp system-location “Basement 123 Any St, New York, NY
10001 USA”
Note: Place the system location in quotes if it includes spaces