Tut Systems SMS2000 - Manual (Page 24)

Initial Configuration
TUT Systems, Inc Page 24 of 104 P/N 220-06288-20
for example, to save the current configuration, type:
sms2000% save
Rebooting the System
In order for saved configuration changes to take effect, you must reboot the system.
To force the system to shut down completely and then restart, use this command:
reboot
For example, to reboot the system, type:
sms2000% reboot
Verifying the Configuration
1. Login to the system.
2. Ping a known site.
sms2000% ping www.yahoo.com
3. Press CTRL-C to stop the pinging.
4. Ping another known site.
sms2000% ping www.apple.com
5. Press CTRL-C to stop the pinging.
If the SMS2000 cannot ping these sites, try to ping a known external IP Address, check
your configuration and the local network to verify that you have connectivity to the
Internet.