Tascam DP-004 - Manual (Page 87)

10–Editing Tracks
TASCAM DP-004 87
4 Select the setting item value. If there are multiple
setting items, use the F3 (§) and F4 (¶) keys to
select an item. Turn the DATA wheel to select a
value.
The different settings are explained in the
following sections for each function.
5 Press the F2 (
EXEC
) key to execute the function.
Press the • F1 ( BACK )
key to return to the
TRACK EDIT
menu
screen without executing the function.
CLONE TRACK (track duplication)
Using CLONE TRACK you can create copies
of single tracks, a track pair or a master track on
different tracks. This copies the entire track, so the
IN and OUT points have no effect.
The two parameters are as follows.
SOURCE TRK
Select the track or tracks to duplicate. The choices
are
1
to
4
(single track),
1/2
,
3/4
(track pairs) and
MST
(master stereo track).
DESTINATION TRK
Select the track or tracks that you want to put the
clone tracks on. The choices depend on the
SOURCE
TRK
item setting.
If you chose a single track as the
SOURCE TRK
, the
DESTINATION TRK
choices are
1
to
4
(single track). If
you chose a track pair (for example,
1/2
) or
MASTER
as
the
SOURCE TRK
, the
DESTINATION TRK
choices are
1/2
or
3/4
(pair track).
After setting the parameters, press the
F2 (
EXEC
)
key
to execute the edit. Press the
F1 ( BACK )
key to return to
the
TRACK EDIT
menu screen without editing.