11–exchanging data with a computer – Tascam DP-004 User Manual

Page 101

11–Exchanging Data with a Computer

TASCAM DP-004

101

NOTE

If there is no stereo master, an error message appears.

3 Use the

/ keys, the

DATA

wheel and the

and

keys to edit the name of the stereo master

file being exported (See “Editing names” on page

4 After setting the name, press the

F2 (

EXEC

)

key. A

stereo master file is exported as a 16-bit, 44.1-kHz,

stereo WAV file to the FAT partition. The file name

of the exported file is the name set in step 3 above

plus the “.WAV” extension.

NOTE

To cancel exporting, press the F1 (BACK) key.

5 Connect this unit to a computer using the USB

cable (see “Connecting with a computer” on page

6 Use the computer to copy the stereo master file

from the WAVE directory on the FAT partition of

the unit to the computer.

7 After copying finishes, disconnect the unit from

the computer using the proper procedures and then