Tascam DP-004 - Manual (Page 68)

68 TASCAM DP-004
6–Basic Recording
Erasing the operation history
When the power is turned OFF, the operation history
of the currently loaded song is erased (cleared). The
operation history is not restored, so past operations
cannot be undone or redone when the power is
turned ON again.
NOTE
The operation histories of songs that are not loaded are
not erased when the power is turned OFF.
You can also erase (clear) the operation history
of the currently loaded song without turning the
power OFF.
1 Press the UN/REDO key while pressing and holding
the stop (ª) key to open the
HISTORY
screen.
2 Press the F4 (
CLEAR
) key. A confirmation message
appears.
3 Press the F3 (
YES
) key. A confirmation message
appears again.
4 Press the F3 (
YES
) key to clear the operation history
and erase unused data. The Home Screen reopens
when this operation completes.
To cancel erasing the operation history, press the • F4
( NO )
key instead of the F3 (
YES )
key.
TIP
If you open the HISTORY screen immediately after •
erasing the operation history, the event (operation)
that appears is “0” (START UP), showing that the
operation history has been cleared.
If you want to keep the operation history even when
•
you power OFF, turn song protect ON before turning
the power OFF (see “Protecting songs” on page 53).
CAUTION
You cannot undo erasing the operation history! Only
do it if you are certain about it.