Rtz and lrp, See “rtz and lrp, 7–recorder functions – Tascam DP-004 User Manual

Page 72

TASCAM DP-004

7–Recorder Functions

2 Turn the

DATA

wheel to change the value above

the cursor. When adjusting, the value will carry

over automatically when it reaches the highest or

lowest value in a field. For example, when turning

the

DATA

wheel to increase the value in the seconds

field, the number will change from

and

the minutes value will increase by one. The time

display blinks when using the

DATA

wheel. The

blinking stops about two seconds after moving to

the new position.

3 Press the

F1 (

DIGIT

)

key to move to a different

time division and turn the

DATA

wheel to change

the value.

4 After setting the desired time value, press the

playback (Á) key to start playback from that

position.

RTZ and LRP

Use simple key operations to return to the top of a

song or to the position where recording last started.

Return To Zero (song beginning at 00:00:00:00)

Press the

key while pressing and holding the

stop (ª) key.

Last Recording Position (the position recording

last started)

Press the  key while pressing and holding the

stop (ª) key.
This function is useful when you want to record the

same passage again.

TIP

RTZ and LRP below the

and  keys are abbre-

viations for Return To Zero and Last Recording Position,

respectively.