Miscellaneous, Metronome, 8–miscellaneous functions – Tascam DP-004 User Manual

Page 76

TASCAM DP-004

8–Miscellaneous Functions

Metronome

This unit has a built-in metronome function that can

be used when the recorder is operating. You can set

it to function during both playback and recording or

only during recording.

1 When the Home Screen is open, press the

key

to open the

screen.

2 Turn the

DATA

wheel to select

METRONOME

and press

the F4 (¥) key to open the

METRONOME

screen.

3 Set the following items. Use the

(§) and F4 (¶)

keys to select each item, and turn the

DATA

wheel to

change the value.

MODE

Select

OFF

(metronome OFF),

REC&PLAY

(functions

both during recording and playback) or

REC ONLY

(functions only during recording).

TEMPO

Set speed from 20 to 250 beats per minute (BPM).

BEAT

Set the frequency of the accent from 1 to 12 for

different time signatures.

LEVEL

Set the metronome volume from 0 to 127.

4 When finished making settings, press the

HOME

key to return to the Home Screen. The metronome

should now function according to the

MODE

setting

set in step 3. Set to

REC&PLAY

, it will function both

during playback and recording. Set to

REC ONLY

, it

will function only during recording. Set to

OFF

, the

metronome does not function. Note that even if the

metronome is on during recording, the metronome

signal is not recorded, but can only be heard when

monitoring.

NOTE

The metronome volume is not affected by the

•

MASTER LEVEL knob. Use the LEVEL item on the

METRONOME screen to adjust it.