Tascam DP-004 - Manual (Page 22)

22 TASCAM DP-004
2–Quick Start Guides
NOTE
You do not need to change the input if you want to
record the lead guitar on track 3.
4 Press the HOME key to return to the Home Screen.
5 Press the TRACK 2 REC key. The key blinks showing
that the track is in record standby.
6 Press the Ô key while pressing and holding the
stop ( ª ) key to return to the beginning of the song.
Press the playback ( Á ) key to listen to the rhythm
guitar track while you practice the lead part. Both
guitar parts can be heard through the headphones.
7 Use the track LEVEL knobs, MASTER LEVEL knob and
VOLUME dial to adjust the output volume and the
balance between the tracks.
8 Return to the start of the track again and press the
playback ( Á ) key while pressing and holding the
record ( – ) key to start recording. The TRACK 2 REC
key stops blinking and stays lit constantly.
You are recording again. Play your guitar!
9 When you are finished, press the stop (
ª ) key to
stop recording.
10 Press the TRACK 2 REC key again. Its light turns off.
Adding another recording (2)—record vocals
on track 3
1 Press ASSIGN to open the
INPUT ASSIGN
screen.
2 Press the F4 (¶) key to select
TRACK 3
to change its
current input channel from the default of
IN A
.