Connections and initial set up – Technicolor - Thomson DTH8005 User Manual
Page 8
Connections and initial set up
8
Channel update
If new channels make their way into the audiovisual scene, you will have to update your
DTH 8005’s list of channels. In such a case, start a new channel search from the installation menu.
This set-up deletes all stored channels and resets all the channels that your DTH 8005 can
receive. If you only want to set-up a single channel, refer to the manual search on page 7.
1.
If the main menu is not displayed, press the
MENU
key.
2.
Select the Setup line using the
or
keys, and press
OK
to validate.
3.
Select the Installation line using the
or
keys, and press
OK
to validate.
4.
Select the Channel search line using the
or
keys, and press
OK
to validate.
An installation window will appear. A cursor shows the
progress in the set-up of the channels.When all the
channels that you can receive in your area have been
stored,
100 %
is indicated. Press
OK
to return to the
Channel search
line. Press
MENU
to return to the
Main Menu.
Clock setting
Your DTH 8005 has an automatic time setting system which recognises the time signals put out
by certain channels. If your DTH 8005 is not set at the right time, you can reset it by following
the instructions below;
1.
If the Main Menu is not displayed, press the
MENU
key.
2.
Select the Setup line using the
or
keys, and press
OK
to validate.
3.
Select the Installation line using the
or
keys, and press
OK
to validate.
4.
Select the Clock Setup line using the
or
keys, and press
OK
to validate.
5.
year is highlighted. Enter the year’s 4 digits
(press 2
,
0
,
0
,
4 for 2004).
6.
Then enter the 4 digits of the date
(press 1
,
5
,
0
,
5 for 15th May).
7.
Enter the 4 digits of the time
(press 1
,
5
,
5
,
9 for 15:59 (03:59 PM).
8.
Press
OK
to confirm.
Sorting the channels
1.
If the Main Menu is not displayed, press the
MENU
key.
2.
Select the Setup line using the
or
keys, and press
OK
to validate.
3.
Select the Installation line using the
or
keys, and press
OK
to validate.
4.
Select the Channel List line using the
or
keys, and press
OK
to validate.
Refer to the Channel Sorting paragraph on page 6 to check or sort out the channels
stored on your DTH 8005.
2_DTH8005_en 9/03/04 17:20 Page 8