Technicolor - Thomson DTH8005 - Manual (Page 3)

Connections and initial set up
3
EN EN
1. Unplug the antenna cable from your TV set and plug it into the ANTENNA-CABLE IN
socket of your DTH 8005.
2. Using the coaxial cable supplied, connect the ANTENNA-CABLE OUT socket of the
DTH 8005 to the
g antenna socket of your TV set.
3. Using the Scart cable supplied, connect the DTH 8005’s AV 1 (TV) socket (TV) to the scart
socket of your TV set (labelled AV 1, EXT 1, AUX 1 depending on the brand).
4. Use the mains cable to connect your DTH 8005 to a mains socket, by first connecting the
cable to the back of the DTH 8005.
Note: connection to a satellite or cable receiver is detailled on page 9.
For UK, please see safety information regarding the mains plug at the end of this user manual, in the cover
page.
Basic connections
Your DTH 8005 has many connection possibilities to allow it to fit into a setup comprising several
devices.We recommend that you follow the connection setup on this page, and then carry out
the adjustments shown on the following pages.You will first need to set up the channels as
explained in the following pages before the final interconnection of the devices, described on
pages 9 to 12.
TV
DTH 8005
220 - 240 V
50 - 60 Hz
DTH 8005 U
DTH 8005 E
Scart cable
Coaxial Cable
1
2 3
4
2_DTH8005_en 9/03/04 17:19 Page 3