Menus – Technicolor - Thomson DTH8005 User Manual

Page 51

Menus

System Options Menu

The System Options menu in the Setup menu offers you settings to configure certain useful
functions and optimise the performances of your DTH 8005 to match those of the devices
connected to it.

From the main menu select the Setup line with the

keys, then confirm with

Select Options system with the

keys, then confirm with

Select a function with the

keys, confirm with

, adjust and confirm with the

keys

and

Note: the explanation of the various functions of this menu are
detailed below. The associated illustrations show the
corresponding adjustments or functions.

Digital output (audio)

Depending on the amplifier or television (with or without integrated
decoder) connected to your DTH 8005, you will need to set the

DIGITAL

AUDIO OUT

sockets (coaxial or optical) so that they deliver the Dolby

Digital, DTS or MPEG digital signals supported by the other device.Tick
Dolby Digital or DTS if the amplifier or TV set has a Dolby Digital or DTS
decoder (or both, depending on devices). MPEG must be ticked to play a
DVD disc on which the sound was recorded using MPEG standard.

SRS - TruSurround

This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
amplifier.The sound effects of a 5.1 system are then simulated.

Note

is a trademark of SRS Labs, Inc. TruSurround

technology is

incorporated under license agreement from SRS Labs, Inc.

Your television set

Audio output

connector

2_DTH8005_en 9/03/04 17:21 Page 51