Technicolor - Thomson DTH8005 - Manual (Page 60)

Further information
60 DTH 8005 - EN / RST - BEI / 03-2004
Remote control - Code A-B
Remote control setting on code B
Note: the remote control of your DTH 8005 is set to code A (3000). To set it to code B (3001) follow the
procedure described below.
1. Press and hold the DVD key.
2. With the number keys, press 3 , 0 , 0 , 1 .
3. Release the DVD key.
DTH 8005 setting on code B
1. Switch on your DTH 8005.
2. Check that there is no disc in the disc tray.
3. Simultaneously press the PLAY/PAUSE , AV keys at the front of your DTH 8005 and release
them when your DTH 8005 displays DVD B .
4. Try to control your DTH 8005 with the remote control.
Note: in the event of a problem, redo the setting of both components:
the remote control and your DTH DTH 8005.
Technical data
Power requirements 220 to 240 V - 50/60 Hz
Power consumption:
• Operating = 36 W
• Standby = 15 W
• Standby, ECO mode = 5 W
Functioning conditions +5°C to + 35°C surrounding humidity: 80 % maximum
Playback system Laser diodes - Wave length: 655 / 780 nm, Laser power CLASSE 2
Reception norms LL’ - BG - I - DKK’
Number of storable channels 99
Remote control Infrared 33 Khz - Batteries 2 x 1.5 V (AAA)
Nominal Specification - THOMSON reserves the right to change the specifications without notice. The
characteristics and aspect of the product may be changed without prior notification. The colour and aspect of
the product may differ from that represented in this manual.
Code A
Code B
On display panel No. to key in
3000
3001 DVD A
DVD B
2_DTH8005_en 9/03/04 17:21 Page 60