Technicolor - Thomson DTH8005 - Manual (Page 25)

Recording functions
25
EN EN
Recording from a connected device
Your DTH 8005 allows you to record TV programmes (satellite or cable) or to copy video
sequences from a connected device.
From a satellite receiver or cable receiver ( AV2 socket )
1. Place a DVD+R or DVD+RW disc in the DTH 8005.
2. From the Main Menu and with the Watch TV function selected, press OK .The images of the
last channel watched appear.The information banner is displayed for several seconds.
3. Select the AV2 connector of the DTH 8005 using the AV button on the remote control, so
that AV2 is displayed in the banner and on ( LIVE AV2 ) display of the DTH 8005.
4. Record by pressing the REC key on the remote control or RECORD on the front panel.
5. Stop the recording by pressing twice on the STOP key.
From a Camcorder or other device ( AV3 , AV4 socket )
Your DTH 8005 has both RCA Audio-Video and Ushiden sockets for the transfer of video to a
recordable disc.
1. Place a DVD+R or DVD+RW disc in the DTH 8005.
2. Place the device in its play mode.
3. From the Main Menu and with the Watch TV function selected, press OK .The images of the
last channel watched appear.The information banner is displayed for several seconds.
4. Using the AV button of the remote control while the information banner is displayed, select
the AV3 connector if your camcorder is connected to the front of your DTH 8005, or AV4 if
it is connected to the S-VIDEO IN connectors or COMPOSITE INPUT at the rear of
the machine.
5. Record by pressing the REC key on the remote control or RECORD on the front panel.
6. Stop the recording by pressing twice on the STOP key.
Note: you can copy films in a single pass without concerning yourself about the content since the Split
Title function will afterwards allow you to isolate and then delete any unwanted sequences.You can also
create titles of your choice. See page 37.
2_DTH8005_en 9/03/04 17:20 Page 25