Recording functions, Programming a recording – Technicolor - Thomson DTH8005 User Manual

Page 22

Recording functions

Programming a recording

You can record a future programme by programming its recording time. For this you have the
choice of manual programming or Naviclick programming, explained on page 24. Open the DVD
tray by pressing the

OPEN/CLOSE

key. Put in a disc with the printed side upwards. Close the

tray using the

OPEN/CLOSE

PLAY

key.

From the main menu (

MENU

key or in Stop mode) select the Timers function with the

key or

then confirm using the

key.

• The Timers screen is displayed. It contains a list of all the deferred recordings that you

have already programmed, whether carried out manually, as explained below, or using the
Naviclick function explained on page 24. If nothing has been programmed the screen
simply displays Add Timer.

Press the

key.

• The programming menu is displayed.This menu allows you to define all the parameters

necessary for a deferred recording. Select each parameter with the

key and enter

the corresponding information with the number keys or the

key as described below.

Note: your DTH 8005 can memorise the parameters of 16
different programmings. In the case of double programming, a
warning message is displayed.

Name
Give a Name to your programme. Press the

INFO

key to access the keyboard table. Use the

keys

and

to compose the title of the recording letter by letter.When

complete, select Keep Timer

with

and press OK.

Channel
a) Enter the channel number using the digit keys of the remote control (Pr -- must be displayed)
or browse the list of channels in the memory of the DTH 8005 using the

PR+/PR-

key.

b) Or select one of the Audio-Video (AV2,AV3,AV4) sockets to which is connected a device
(satellite receiver or other) using the

key (the socket details are shown on page 14).

Note: selecting the AV2 connector allows you to program the recording of a satellite reciever programme
(either left switched on or also programmed) connected to this connector. The selecting of the AV2 connector
is activated by default by the AV Timer function (triggering of programming via the AV connector).

Day (s)
Using the digit keys on the remote control type in the date, if the recording is not made the
same day, and / or select a period using the

key.

Once: to record the selected programme according to the parameters you have defined.

Every Fri: to record the same programme the same day every week starting from today (supposing today
is Friday).

Mon-Fri: to record the same programme, everyday at the same time from Monday to Friday.

2_DTH8005_en 9/03/04 17:20 Page 22