Toshiba DK 24 - Manual (Page 29)

5. After you dial the station number (203 in this example), you will see
one of the displays below for about three seconds. The display will
then change to the display in Step 6.
6. After three seconds the user’s name (or number) is replaced with the
following display and you can voice announce to station 203.
■ You could stop the called station voice announce and make station
203 ring by pressing the RING Soft Key.
■ Instead of proceeding with the Conference, you could transfer the
call by pressing the TRNS Soft Key.
■ You could terminate the operation and return to the outside call by
pressing the RTRN Soft Key.
7. The LCD will appear as follows after the called station answers. Your
station is connected to Station 203 and the outside call remains on
hold. Press the JOIN Soft Key to join all parties in a Conference.
■ Instead of proceeding with the Conference, you could transfer the
call by pressing the TRNS Soft Key.
■ You could terminate the operation and return to the outside call by
pressing the RTRN Soft Key.
A N N O U N C E T O 2 0 3
T R N S R I N G R T R N
C A L L I N G
2 0 3
C A L L I N G
T O M B R O W N 2 0 3
STRATA DK SOFT KEY OPERATION
3-3
T A L K W I T H 2 0 3
T R N S J O I N R T R N
or
Called station (203) has “user
name” turned off. Called station (203) has “user
name” turned on.