Toshiba DK 24 - Manual (Page 15)

The digits are displayed as you dial over either a Central Office (CO) line
or the intercom using:
■ Manual dialing
■ Automatic dialing
■ Repeat last number dialed
■ Saved number redial
NOTE:
If you are calling on a CO line, the display will automatically change from
dialed number to elapsed time after a programmed period of time.
When you are called from a door phone, its designating characters are
displayed.
When you call a door phone, its designating characters are displayed.
NOTE:
The door phone designators are NA, NB, and/or NC (N = 1 ~ 4, and
indicate which of the 12 possible door phones is calling or is being
called).
While you are making an outgoing Central Office (CO) line call, the
elapsed time of the call is displayed. Elapsed time automatically replaces
the dialed number on the display after a programmed period of time.
(Timing begins when a LINE button is pressed.)
NOTES:
1. On a CO line call, the display can be alternated between date/time,
elapsed time, and dialed number by pressing the Page button
(Soft Keys must be off before the call is started).
2. Elapsed time is displayed for 15 seconds after you hang up, and
then changes automatically to date/time.
To find out what your intercom or extension number is if does not appear
on your display, press
Intercom 4 0 1 or CONF 4 0 1 and the
intercom number will be displayed.
STRATA DK LIQUID CRYSTAL DISPLAY
1-7
Dialed Number:
1. CO Line
2. Intercom
Door Phone/Monitor:
Elapsed Time:
Intercom Number Display:
N 0 . N N N
5 5 5 1 3 7 4
N 0 . N N N
2 0 1
N 0 . N N N
D O O R P H O N E 1 A
T = N N N N I
N 0 . N N N
0 0 : 1 3 : 2 3
N 0 . N N N
D O O R P H O N E 1 A