Station-to-station message waiting – Toshiba DK 24 User Manual
Page 21
2-3
NOTES:
1.
To cancel call forward, press
Intercom 6 0 1 Spkr
(or press the
call forward button used to set call forward).
2.
If call forward is set:
■
Central Office (CO) lines that ring at your station only will
forward (CO lines that ring into more than one station will not
forward).
■
CO line calls transferred to your station will forward.
■
Intercom calls will forward.
■
Call forward redirects the station hunt feature.
STATION-TO-STATION MESSAGE WAITING
If there is no answer (busy or DND), press the
Msg
button (or dial
7
).
This causes the Msg LED on the called station to flash. The called
station’s LCD displays the calling station’s number.
When the returned call is answered, the flashing Msg LED will turn off.
NOTE:
Up to four message waiting displays may be stored on the LCD. The
station number in the left-most position will be called when the
Msg
button is pressed. To rotate the station numbers, press the
Scroll
button. The fourth message is reserved for the Message Center.
To Use Station-to-Station
Message Waiting:
1. Lift the handset.
2. Dial the desired station
number.
3. The called station user
presses the
Intercom
and
Msg
buttons to return the
call.
4. To clear the Msg LED from
the called station, press the
Msg
button.
5. To clear the Msg LED from
the calling station, press the
Intercom
button, dial the
station number and press the
Msg
button twice (or
7 7
).
STRATA DK
FEATURE OPERATION