4-7-1. basic – Transition Networks MIL-SM808GPXX User Manual

Page 99

5-4-7-1. Basic

VLAN Configuration

By default, there are no VLANs set for the switch. In order to configure any of the

different types of VLANs, VLANs need to be enabled in the switch using

Settings/Advanced/Protocol Enable Settings/VLAN Operational Mode. The

following are the choices offered:

Port Based VLANs

This screen shows the current Port Based VLANs configured. To configure new

VLANs click the Add button. You can also delete configured VLANs using this

screen. To edit a VLAN (change the ports) highlight the VLAN name and then click

Edit. There can be up to 256 different port based VLANs configured.

When adding a VLAN this screen allows the configuration of the VLAN. The

configuration includes the number of ports, the text name and the Group ID that will

belong to the specific VLAN. These VLANs only apply to this switch. The VLANs

can be overlapping, meaning that any port can belong to more than one VLAN. One

configuration that is common for port based VLANs is to have all the ports on the