Tascam DR-07 - Manual (Page 78)

78 TASCAM DR-07
Using QUICK FORMAT
Use the
QUICK FORMAT
item to quickly format
the SD card.
1 Select the
QUICK FORMAT
item and press
the ¥/π key to highlight “
Exec
.”
2 Press ¥/π to open a pop-up confirmation
window.
3 Press the ¥/π key to execute the quick
formatting, or press the STOP/HOME key
to cancel formatting.
Using FULL FORMAT
Use the
FULL FORMAT
item to completely
format the SD card.
Full formatting checks the memory for errors
while formatting, so it takes more time than quick
formatting and you might have to wait a while.
NOTE
Full formatting of a 2GB SD card takes about 20
minutes or more depending on the type of SD
card.
1 Select the
FULL FORMAT
item and press
the ¥/π key to highlight “
Exec
.”
2 Press ¥/π to open a pop-up confirmation
window.
3 Press the ¥/π key to execute the full
formatting, or press the STOP/HOME key
to cancel formatting.
CAUTION
When using FULL FORMAT, use the AC •
adapter (sold separately) or confirm that
the batteries’ power remains enough.
If the power fails during formatting, the
formatting may not occur correctly.
Depending on the size of the SD
•
card, FULL FORMAT could take an
hour or more. Please be patient and
do not disconnect the power during
formatting.
13–System Settings and Formatting