Tascam DR-07 - Manual (Page 20)

20 TASCAM DR-07
Date/Time Screen.
The clock stops while this screen is displayed.
3 Use the µ and ≤ keys to move the
cursor (the part highlighted in inverse)
and use the wheel to set the values.
4 After making the setting, press the ¥/π
key to restart the clock from the newly
set value.
The display returns to the Menu Screen.
NOTE
The contents of date and time settings last •
only several minutes if the power is not
supplied by batteries or an AC adapter. We
recommend that you replace the batteries
before they deplete completely when you
power the unit only by the batteries.
We also recommend that you install batter-
•
ies even you are using an AC adapter. The
setting can be retained by this even the AC
adapter is disconnected.
If the setting is reset, make the setting again.
•
2–Preparation