Tascam DR-07 - Manual (Page 22)

22 TASCAM DR-07
3–Part Names and Functions
Top panel
1 Built-in stereo microphone
To use this stereo electret condenser
microphone as the input source, select “
MIC
”
on the Input Setting screen. If you connect an
external microphone to the MIC IN jack on the
rear panel, the built-in microphone becomes
inactive.
2 Display
In addition to the Home Screen, this shows
the recording screen, various setting screens,
and other operation information. (See “Screen
Overview” on page 29.)
3 I/O LOOP key
Use this key to set the IN (start) and OUT
(end) points, and playback the interval (loop
playback). Also, use this key to cancel the
loop playback. (See “Loop playback” on page
73.)