2–preparation, Inserting the sd card, 2–preparation 14 – Tascam DR-07 User Manual
Page 14
14
TASCAM DR-07
Inserting the SD card
An SD card is used as recording media for
recording and playback.
Cards that comply with SD and SDHC stan-
•
dards can be used.
A list of SD cards that have been tested with
•
this unit can be found on the TASCAM web
sit.
The SD card slot and the USB connector are under
the cover on the left side of the unit. The SD card
is to be inserted in here.
If you try to force the SD card in the wrong way,
the slot and the card could be damaged, so please
use caution.
NOTE
An SD card is pre-installed when the unit is new.
There is no need to reset this SD card before
using it to record or play files.
1. Press the cover down in the direction of the
arrow to open it.
2. Insert the SD card in the SD card slot and
push it until it clicks fully into place.
3. Close the cover after inserting the card.
2–Preparation