Toshiba 165 - Manual (Page 55)

Placing Originals 53
3
Lower the Platen Cover (optional) or the Reversing Automatic Doc-
ument Feeder (optional) / Automatic Document Feeder (optional)
carefully.
y Do not try to lower the Platen Cover (optional) or the Reversing Automatic Document
Feeder (optional) / Automatic Document Feeder (optional) forcibly when the original
is very thick. There will be no problem in copying even if they are not fully lowered.
y Do not look fully at the original glass since intensive light may leak out during copy-
ing.
Using Reversing Automatic Document Feeder (optional) / Automatic
Document Feeder (optional)
When a stack of originals are placed on the Reversing Automatic Document Feeder (optional) /
Automatic Document Feeder (optional), the originals are automatically scanned one by one. The
following types of originals are available
*1
:
*1 To scan 2-sided originals, the Reversing Automatic Document Feeder (optional) is required.
y Some media types may not be used.
y The maximum number of sheets acceptable varies depending on the media types of the
originals.
y A5 size originals must be placed in a landscape direction.
y Sizes which the Reversing Automatic Document Feeder (optional) / Automatic Document
Feeder (optional) can detect automatically are A3, A4, A4-R, A5-R, B4, B5, B5-R and
FOLIO. (The size of FOLIO originals can be detected automatically only when they are
placed on the Reversing Automatic Document Feeder (optional).)
Precautions for Reversing Automatic Document Feeder
(optional) / Automatic Document Feeder (optional)
Do not use the following types of original since such types may cause a paper jam or damage to
the equipment:
y Extremely wrinkled, folded or curled ones
y Ones with carbon paper
y Taped, pasted or cut-out ones
y Clipped or stapled ones
y Ones with holes or tears
y Damp ones
y Overhead transparencies or tracing paper
y Coating paper (e.g. coated with wax)
The following types of originals are usable but need extra care:
y Ones which cannot be slid with fingers or whose surface is specially treated (they may not be
separated from each other at feeding)
y Folded or curled ones (should be smoothed out before being used)
Media types Maximum size
Maximum number of
sheets acceptable
Paper weight
Plain paper 297 mm x 432 mm 100 sheets
(or stack height 16 mm) 50 - 127 g/m 2