Toshiba 165 - Manual (Page 206)

8 SPECIFICATIONS AND OPTIONS
204 e-STUDIO165/205 Specifications
e-STUDIO165/205 Specifications
y These specifications vary depending on the copying conditions and the environment.
y Specifications and appearance are subject to change without notice in the interest of product
improvement.
Model name DP-1650/2040
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method 2 halogen lamps
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Reversing Automatic Document Feeder / Automatic
Document Feeder is installed: Fixed scanning system by feeding
the original)
Original scanning sensor Linear CIS sensor
Scanning light source LED
Resolution Scanning 600 dpi x 600 dpi
Writing 2400 dpi x 600 dpi (Smoothing process)
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3
Acceptable copy
paper size Drawer A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP,
13"LG
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R,
COMP, 13"LG
Acceptable copy
paper weight Drawer
64 - 80 g/m 2
Bypass
64 - 80 g/m 2 (for continuous feed)
50 - 163 g/m 2 (for single feed)
64 - 80 g/m 2 (When the Automatic Duplexing Unit is used.)
Warm-up time Approx. 25 seconds
First copy time (A4 portrait) 7.6 seconds or less
Continuous copy speed See P.205 “Continuous copying speed”
Multiple copying Up to 999 copies (digital key entry)
Excluded image
width Copy Leading edge: 3.0±2.0 mm, Trailing edge: 3.0±2.0 mm,
Both edges: 2.0±2.0 mm
Printer Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edges: 5.0±2.0 mm
Reproduction ratio Actual size 100±0.5%
Zoom
25 - 200% (in 1% increments)
Paper supply Drawer
250 sheets (80 g/m 2 )
Bypass 100 sheets (80 g/m 2 )
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 7 exposure steps
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No condensation)
Power requirements 220 - 240 V±10%, 8 A (50/60 Hz),
127 V±10%, 12 A (50/60 Hz) (for Saudi Arabia 100 V version only)
Power consumption 1.6 kW or less (including optional equipments),
1.5 kW or less (including optional equipments) (for Saudi Arabia
100 V version only)
Dimensions (equipment only) 600 mm (W) x 658.6 mm (D) x 462.5 mm (H)
Weight Approx. 32.5 kg
Space occupied (equipment only) 948 mm (W) x 658.6 mm (D)
Storage capacity Max. 250 sheets or until the memory is full (TOSHIBA’s own chart)
Loading capacity for the receiving
tray
Approx. 250 sheets (64 g/m 2 )