Preparation 2 - placing copy paper, Acceptable media types, P.35 “preparation 2 - placing copy paper – Toshiba 165 User Manual
Page 37
Preparation 2 - Placing Copy Paper 35
Preparation 2 - Placing Copy Paper
Place copy paper in an appropriate paper source before you start copying.
Acceptable media types
Acceptable media types differ depending on its paper source. See the table below for the details.
*1 “Maximum sheet capacity” refers to the maximum number of sheets when TOSHIBA-recommended
paper is used. See the following page for the TOSHIBA-recommended paper:
*2 The paper of 50 to 63 g/m
2
can be used if it is set on the bypass tray one by one.
*3 Automatic duplex copying is not available.
*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
y
You cannot mix various paper sizes in one drawer.
y
“LT format” is the standard size for only use in North America.
Abbreviations for LT format sizes:
LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer
Feeder
Media type
Paper size
Maximum sheet
capacity
*1
Drawers of
the equip-
ment and
Paper Feed
Unit
(optional)
Plain paper
(64 - 80 g/m
2
)
A/B format:
A3, A4, A4-R, B4, B5, B5-R, FOLIO
LT format:
LD, LG, LT, LT-R, COMP, 13"LG
250 sheets
(64 g/m
2
)
250 sheets
(80 g/m
2
)
Drawers of
the Paper
Feed Ped-
estal
(optional)
Plain paper
(64 - 80 g/m
2
)
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG
550 sheets
(64 g/m
2
)
550 sheets
(80 g/m
2
)
Bypass tray Plain paper
64 - 80 g/m
2
)
*2
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG
100 sheets
(64 g/m
2
)
100 sheets
(80 g/m
2
)
THICK PAPER 1
(81 - 105 g/m
2
)
*3
1 sheet
(81 - 105 g/m
2
)
THICK PAPER 2
(106 - 163 g/m
2
)
*3
1 sheet
(106 - 163 g/m
2
)
Tracing paper
(75 g/m
2
)
*3
1 sheet
Sticker labels
*3
1 sheet
Transparencies
*3, *4
A4 only
1 sheet