TurboChef Technologies TDO30 * 240 - Manual (Page 27)

The Top oven The Top oven 21 The Top oven
2. select “oven setup.”
3. select “sound.”
4. select the individual sound you wish to turn on or off.
By default, all oven sounds are turned on initially. Use the inner CookWheel knob to scroll to and select the sound to be turned on or off.
OVEN STARTUP: This is sound is heard the first time the oven first turned on initially. Additionally, if the oven loses power, you will hear
this sound the first time the oven is turned on after power is restored.
PREHEAT IS DONE: This sound alerts you that the oven has complete the preheat cycle and is ready to cook your chosen item. When this
sound is turned on, oven will chime every five minutes until you either cancel or start the cook cycle.
80% COOKING REMINDER: This sound alerts you that the cook cycle is 80% complete. If you choose not to address the oven at this
point, you will hear this chime at 15 seconds and 30 seconds. After 30 seconds, the oven continues the cook cycle. See page 11 for more
information on making adjustments at the 80% Cooking Reminder.
100% COOKING REMINDER: This sound alerts you that the cook cycle is complete. You will hear this chime every 8 seconds until the
oven door is opened or you select an adjustment option. See page 12 for information on making adjustments at the end of a cook cycle.
VALID SELECTION: This sound is heard every time a valid selection is made.
INVALID SELECTION: This sound is heard every time you attempt to select an invalid option.
NoTe: To return to the main “Oven Setup” screen, press the “Back” key. To return to the main “Info” screen, press the “Cancel” key.
Use the inner CookWheel knob to scroll to “Oven Setup.” Press knob to select.
For information on “Help Topics” and/or “Oven Tips” see page 23.
You will know if a sound is on or off by the “ON” or “OFF” located to the left of each sound
option. To change the status of a sound, press the inner CookWheel knob or “Start” key.
In this example, the “Oven Startup” sound is select. This sound is currently turned on. In the screen
below, it has been turned off.
Use the inner CookWheel knob to scroll to “Sound.” Press knob to select.
For information on “Display” and “Units & Measurements,” see page 22.
NoTe: The option “Installer Setup” is for qualified service technicians. By entering a six digit
code, they will have the ability to access and test different internal components of the oven.