TurboChef Technologies TDO30 * 240 - Manual (Page 18)

12 The Top oven The Top oven The Top oven
4. press the inner CookWheel knob to confirm selection.
NoTe: When an adjustment is made, only the power level changes – NOT the remaining cook time.
If the cook cycle is initiated from a preprogrammed recipe, changes made during a cook cycle are saved in Favorites under “View Last
Cooked (10)” (see page 8). The original preprogrammed setting will not be altered. To permanently save your adjustments, the item must
be saved to Favorites (see page 17).
If the cook cycle is initiated from a recipe already saved in Favorites, changes made during a cook cycle are saved in Favorites under “View
Last Cooked (10).” The originally saved settings, will not be changed unless you re-save the item by its same name.
Making adjustments at The end of a Cook Cycle
At the end of a cook cycle, the oven chimes and cooking stops. If desired, you can make final adjustments
by selecting “Cook More,” “Brown More,” or “Cook and Brown More.”
To make adjustments at the end of a
cook cycle:
1. initiate a cook cycle. (see pages -9 for detailed instructions.)
2. The cook cycle is 80% complete – make adjustments.
For information on making adjustments during a cook cycle, see page 11.
3. The cook cycle is complete. Check food for final adjustments.
A chime sounds to indicate the cook cycle is complete. Check your food item. If a selection is not made after 3 minutes, the oven
assumes the item is done and advances to the “Save to Favorites”/“Cook Another”/“Done” screen.
When the door is opened or after 3 seconds, a message appears with four adjustment options:
“Cook More,” “Brown More,” “Cook and Brown More,” or “Done Cooking this Dish.”
Turn the inner CookWheel knob to scroll to and select the desired adjustment.
In this example, “Cook Less” is selected.
A chime sounds to indicate the cook cycle is complete. Check the item.