Tyan Computer TEMPEST S5375 - Manual (Page 65)

65
3.6.2 South Bridge Configuration Sub-Menu
This menu gives options for customizing South Bridge Chipset settings. Select a
menu by highlighting it using the Arrow (З/И) keys and pressing Enter. The
settings are described on the following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
South Bridge Chipset Configuration
HDA Controller
SMBUS Controller
SLP_S4# Min. Assertion Width
Restore on AC Power Loss
Onboard VGA
Lan1
Lan2
Chassis Intrusion Detect
[Enabled]
[Enabled]
[1~2 seconds]
[Power Off]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
←
→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
South Bridge Chipset Configuration
Enabled HDA Controller
(S5375AG2NR only)
Disabled
Enable or
disable HDA controller
Enabled
SMBUS Controller
Disabled
Enable or disable SMBUS controller
4-5 seconds
3-4 seconds
2-3 seconds
SLP_S4# Min.
Assertion Width
1-2 seconds
Select Timing for SLP_S4#
Power Off
Power On
Restore on AC Power
Loss
Last State
Configure how the system board
responds to a power failure.
Enabled
Onboard VGA
Disabled
Enable or disable Onboard VGA
controller
Disabled
Lan1/Lan2
Enabled
Enable or disable LAN1/LAN2
Disabled
Chassis Intrusion
Detect
Enabled
Enable/Disable the function of chassis
intrusion detect. When chassis open
event is detected, BIOS will record the
event.