Tyan Computer TEMPEST S5375 - Manual (Page 32)

32
Setup Basics
The table below shows how to navigate in the setup program using the keyboard.
Key Function
General help window
Exit current menu
Е Ж arrow keys Select a different menu
↑ or ↓ arrow keys Move cursor up/down
or Cycle cursor up/down
or Move cursor to top/bottom of the window
or Move cursor to next/previous page
<-> Select the previous value/setting of the field
<+> Select the next value/setting of the field
Load Fail Safe default configuration values of the menu
Load the Optimal default configuration values of the
menu
Save and exit
Execute command or select submenu
Getting Help
Press [F1] to display a small help window that describes the appropriate keys to use
and the possible selections for the highlighted item. To exit the Help Window, press
[ESC].
In Case of Problems
If you have trouble booting your computer after making and saving the changes with
the BIOS setup program, you can restart the computer by holding the power button
down until the computer shuts off (usually within 4 seconds); resetting by pressing
CTRL-ALT-DEL; or clearing the CMOS.
The best advice is to only alter settings that you thoroughly understand. In particular,
do not change settings in the Chipset section unless you are absolutely sure of what
you are doing. The Chipset defaults have been carefully chosen either by TYAN or
your system manufacturer for best performance and reliability. Even a seemingly
small change to the Chipset setup options may cause the system to become
unstable or unusable.
NOTE : The following pages provide the details of BIOS menu. Please be noticed
that the BIOS menu are continually changing due to the BIOS updating. The BIOS
menu provided are the most updated when this manual is written. Please visit
Tyan’s website at
http://www.tyan.com for the information of BIOS updating.