2. port status – TRENDnet TEG-S081FMI User Manual
Page 52
5-2. Port status
1. port status
State: Display port status off or on depended on user setting. “unlink” will
be treated as “off ”.
Link Status: Down is “No Link”, UP is “Link”
Auto Negotiation: auto negotiation mode
Speed status: Display link speed, Port 1- 8 is 100Mbps, Port 9 is
1000Mbps.
Duplex status: Display full-duplex or half-duplex mode.
Flow control: Display flow control status enable or disable mode
Config: Display the state of user setting.
Actual: Display the negotiation result.
User can see a single port counter as follows
52