TRENDnet TEG-S081FMI - Manual (Page 28)

: Save all configure value.
: Exit this page and return to previous menu.
High Low Queue service ratio: 1:1 ,2:1, 3:1, 4:1, 5:1, 6:1, 7:1, FIFO,H
ÎL
First In First Out (FIFO): The sequence of packets sent is depend on arrive
order.
High to Low (H
ÎL): The high priority packets sent before low priority
packets.
Ratio (1:1 ,2:1, 3:1, 4:1, 5:1, 6:1, 7:1): Select the preference given to packets
in the switch's high-priority queue.
These options represent the number of high priority packets sent before one
low priority packet is sent. For example, 2 High : 1 Low means that the switch
sends 2 high priority packets before sending 1 low priority packet.
4-3-6.MAC Address Configuration
4-3-6-1.Static MAC Address
When you add a static MAC address, it remains in the switch's address table,
regardless of whether the device is physically connected to the switch. This
saves the switch from having to re-learn a device's MAC address when the
disconnected or powered-off device is active on the network again.
28