TRENDnet TEG-S081FMI - Manual (Page 34)

Actions->
: Configure all items. Finished configure press ESC to go back action
menu line.
: Save all configure value.
: Exit this page and return to previous menu.
4-3-7-4.Max bridge transmit delay bound
Max bridge transmit delay bound (0,1-4 sec): Limit the packets queuing
time in switch. If enable, the packets queued exceed will be drop. Press
Space key to set the time. These valid values are 1sec, 2sec, 4sec and off.
Default is 1 seconds.
Enable Delay Bound: Limit the low priority packets queuing time in switch. If
enable, the low priority packet stays in switch exceed Max Delay Time, it will
be sent. Press Space key to enable or disable this function.
Max Delay Time: To set the time that low priority packets queuing in switch.
The valid range is 0~255 ms.
34